Name | sodium tetrathionate dihydrate |
Synonyms | SODIUM TETRATHIONATE SodiuM tetrathionate dihydra tetrathionatesodiumdihydrate disodiumtetrathionatedihydrate Tetrathionate sodium dihydrate sodium tetrathionate dihydrate Sodium tetrathionate, dihydrate Disodium tetrathionate dihydrate Foursulfonic acidsodiuMhydrate,two tetrathionicacid,disodiumsalt,dihydrate Tetrathionic acid, disodium salt, dihydrate |
CAS | 13721-29-4 |
EINECS | 683-390-0 |
InChI | InChI=1/Na.H2O6S4.H2O/c;1-9(2,3)7-8-10(4,5)6;/h;(H,1,2,3)(H,4,5,6);1H2 |
InChIKey | HAEPBEMBOAIUPN-UHFFFAOYSA-L |
Molecular Formula | H4Na2O8S4 |
Molar Mass | 306.27 |
Density | 2.1g/mLat 25°C(lit.) |
Solubility | H2O: soluble50 mg/mL, slightly turbid, colorless |
Appearance | White powder |
Specific Gravity | 2.1 |
PH | 3.8-6.0 (25℃, 0.1M in H2O) |
Storage Condition | 2-8°C |
MDL | MFCD00150868 |
Use | This product is for scientific research only and shall not be used for other purposes. |
Hazard Symbols | Xi - Irritant |
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
WGK Germany | 3 |
RTECS | XF6470000 |
FLUKA BRAND F CODES | 10 |
HS Code | 28429090 |
application | sodium tetrasulfate is widely used in the process of biomedicine as a mutating agent for recombinant proteins. |
preparation | a method for catalyzed synthesis of sodium tetrasulfate with elemental iodine. the specific steps are as follows: sodium thiosulfate, water, elemental iodine and organic solvent a are sequentially added to the reactor to react for 4-36h at 0-40 ℃. after the reaction is completed, the filter cake is dissolved in water and filtered, add the filtrate to the cold organic solvent B for recrystallization, filter, and dry to obtain the product with sodium tetrasfate. The specific steps are as follows: 1) Weigh and add activated carbon dried to constant weight into 2.5% iodine ethanol solution, stir at room temperature and filter, rinse with ethanol to neutral many times, dry to constant weight at 70 ℃, put into a dryer, cool and weigh, and calculate the load. That is, iodine loading =(W1-W)/W1 × 100%, where W1 is the mass (g) of activated carbon after loading and W is the mass (g) of activated carbon before loading. 2) Add 20g of sodium thiosulfate pentahydrate and 20ml of water to a 500ml eggplant-shaped bottle, stir until dissolved at 4 ℃, then add 35g of iodine prepared by the method described in Example 1 to the eggplant-shaped bottle. The loading amount is 30% activated carbon loaded with elemental iodine, 100ml of anhydrous ethanol, stir for 12 hours at 4 ℃, filter, wash the filter cake three times with 10ml of anhydrous ethanol, place the filter cake in a 100ml beaker, add 10ml of water, stir and dissolve, filtering, adding the filtrate to a 500ml eggplant-shaped bottle, adding 100ml of cold anhydrous ethanol to it, stirring for 6 hours, filtering, washing the filter cake with 10ml anhydrous ethanol for three times, placing the filter cake in a vacuum drying oven at 2-8 ℃ and drying for 12 hours to obtain the product sodium tetrasulfate. After calculation, the yield is 72% and the purity is 95%. |
use | quantitative determination of cystine and cysteine in protein. Reversibly modify the cysteine residue of bacterial fluorescein. |